Stationary transistor radio `` Lyubava ''.
Radiols and receivers p / p stationary.DomesticSince the beginning of 1974, the stationary transistor radio receiver "Lyubava" has been produced by the Riga PO Radiotekhnika. The ship's all-wave radio receiver "Lyubava" was created on the basis of the radio "Victoria 001". It provides reception of radio transmissions in the ranges of DV, SV, HF and VHF to an external (ship) antenna. It is possible to connect a player and a tape recorder for recording or playback of received radio programs. An external speaker is included. The radio frequency unit is housed in a case finished with fine wood veneer. The HF range is divided into 8 sub-bands from 13 to 130 m, switchable with a drum switch. A special feature is the KV1 range (MF - intermediate waves) 60 ... 130 m. The receiver has VHF-1 and VHF-2 ranges, corresponding to Soviet and European standards. Real sensitivity with an output power of 50 mW and a signal-to-noise ratio of 20 dB from an external antenna to DV, SV, KV is 10 ... 40 μV, to VHF - 1.5 - 2.5 μV. Selectivity on the adjacent channel - 60 ... 70 dB. The receiver uses one channel of the power amplifier, the same as in the radio. The nominal output power of the amplifier with a load of 8 ohms is 4 W, maximum 16 W. The working frequency band when working on VHF is 40 ... 16000 Hz. The speaker contains three different-frequency heads of direct radiation: low-frequency 8GD-1, medium-frequency 4GD-6, high-frequency 3GD-2 and crossover filters. The receiver has an internal (control) loudspeaker 0.25GD-2. Speaker dimensions - 675x360x270 mm, weight - 18 kg.
